Cisco SPS208G

SNMP
Global Parameters
SPS208G/SPS224G4/SPS2024 Service Provider Switches User Guide 218
12
The SNMP configuration options are as follows:
• Global Parameters
• Views
• Group Profile
• Group Membership
• Communities
• Notification Filter
• Notification Recipient
Global Parameters
The Global Parameters Screen contains parameters for defining SNMP
authentication and notification parameters.
To define SNMP authentication and notification parameters on the device:
STEP 1 Click SNMP > Global Parameters. The Global Parameters Screen opens.
Figure 99 SNMP Global Parameters Screen
The
Global Parameters Screen contains the following fields:
• Local Engine ID — Indicates the local device engine ID. The field value is a
hexadecimal string. Each byte in hexadecimal character strings consists of
two hexadecimal digits. The Engine ID must be defined before SNMPv3 is