Cisco SPS208G

Network Security
Port Security
SPS208G/SPS224G4/SPS2024 Service Provider Switches User Guide 125
7
To d e f i n e p o r t s e c u r i t y :
STEP 1 Click Network Security > Port Security. The Port Security Screen opens.
Figure 55 Port Security Screen
The
Port Security Screen is divided into two areas:
• Port Security Parameters
• Port Security Table
The Port Security Parameters area contains the following fields:
• Interface — Indicates the port or LAG to configure the Port Security.
- Unit No. — Indicates the stacking member being managed.
- Port — Indicates port to configure.
- LAG — Indicates LAG to configure.