Cisco SPS208G

Security Suite
DHCP Trusted Interfaces
SPS208G/SPS224G4/SPS2024 Service Provider Switches User Guide 139
8
The DHCP Trusted Interface Screen contains the following fields:
• Unit No. — Indicates the stacking member for which the Trusted Interface
settings are displayed.
• Interface — Indicates the port or LAG on which Trust is enabled or disabled.
• Trust Status — Enables or disables DHCP Snooping Trust mode on the
interface. The possible field values are:
- Enable — Indicates that DHCP Snooping Trust mode is enabled on the
interface.
- Disable — Indicates that DHCP Snooping Trust mode is disabled on the
interface.
STEP 2 Enable or disable the Trust Status for the relevant interfaces.
STEP 3 Click Save Settings. The Trusted Interfaces are defined, and the device is
updated.