Security Suite
DHCP Database
SPS208G/SPS224G4/SPS2024 Service Provider Switches User Guide 141
8
STEP 2 Select Query By and define any of the following fields as a query filter:
• MAC Address — Indicates the MAC addresses recorded in the DHCP
Database. The Database can be queried by MAC address.
• IP Address — Indicates the IP addresses recorded in the DHCP Database
The Database can be queried by IP address.
• VLAN ID — Indicates the VLANs recorded in the DHCP Database. The
Database can be queried by VLAN.
• Interface — Indicates the interface that will be queried in the DHCP
Database. The possible field values are:
-
Unit No.
— Queries the VLAN database by a specific stacking member.
-
Port
— Queries the VLAN database by a specific port number.
-
Trunk
— Queries the VLAN database by a specific trunk number.
• Typ e — Indicates the IP address binding type. The possible field values are:
-
Dynamic
— Indicates the IP address is dynamically defined by the
DHCP server.
-
Static
— Indicates the IP address is static.
• Lease Time — Indicates the amount of time the DHCP Snooping entry is
active. Addresses whose lease times are expired are ignored by the switch.
The possible values are 10 – 4294967295 seconds. Select Infinite if the
DHCP Snooping entry never expires.
STEP 3 Click Query. The results appear in the Query Results table.
To browse to a specific DHCP Snooping entry, click the First, Previous, 1, 2, Next,
and Last links above the table.
To Next Page
Loading...
Need help?
General
