To Next Page

To Previous Page

Security Suite

ARP Inspection List

SPS208G/SPS224G4/SPS2024 Service Provider Switches User Guide 147

• Delete List Name — Removes ARP Inspection lists from interfaces. The

possible field values are:

Checked

— Removes the specific ARP Inspection Binding List from the

selected interface.

Unchecked

— Maintains the current ARP Inspection Binding List

assignments.

• IP Address — Specifies IP addresses included in ARP Inspection Binding

Lists which are checked against ARP requests.

• MAC Address — Specifies MAC addresses included in ARP Inspection

Binding Lists which are checked against ARP requests.

STEP 2 Define the ARP Inspection Binding List Name.

STEP 3 Add the IP address and MAC address which are validated by the ARP requests.

STEP 4 Click Add To List. The ARP Inspection Binding List details appear in the table at the

bottom of the

ARP Inspection List Screen

STEP 5 Click Save Settings. The ARP Inspection Binding configuration is defined, and the

device is updated.

To delete an ARP Inspection Binding List from the device:

STEP 1 In the ARP Inspection List Table, select the entry.

STEP 2 Click Delete. The selected list is deleted from the device.

STEP 3 Click Save Settings. The ARP Inspection Binding configuration is modified, and the

device is updated.

The ARP Inspection List Table contains a list of ARP Inspection Binding Lists on the

device.

Cisco SPS208G User Manual

Other manuals for Cisco SPS208G