SNMP
Group Profile
SPS208G/SPS224G4/SPS2024 Service Provider Switches User Guide 224
12
To modify an SNMP group profile:
STEP 1 Select the group profile in the Log Table.
STEP 2 Define the relevant fields.
STEP 3 Click Update. The SNMP group profile is updated in the Log Table. The device is
updated.
To delete an SNMP group profile from the device:
STEP 1 In the Group Table, select the entry.
STEP 2 Click Delete. The selected SNMP group profile is deleted from the device.
To Next Page
Loading...
