Cisco SPS208G User Manual

Admin
Dynamic Address
SPS208G/SPS224G4/SPS2024 Service Provider Switches User Guide 245
13
To learn dynamic MAC addresses on a specific interface:
STEP 1 Click Admin > Dynamic Address. The Dynamic Address Screen opens.
Figure 111 Dynamic Address Screen
The
Dynamic Address Screen contains the following areas:
• General Parameters
• Query Parameters
• Query Results Table
The General Parameters area contains the following fields:
• Address Aging — Specifies the amount of time the MAC address remains in
the Dynamic MAC Address table before it is timed out, if no traffic from the
source is detected. The default value is 300 seconds.
• Clear Table — If checked, clears the MAC address table.

Cisco SPS208G Specifications

General

Brand	Cisco
Model	SPS208G
Category	Switch
Language	English