Cisco SPS208G

VLAN Management
CPE VLAN Mapping
SPS208G/SPS224G4/SPS2024 Service Provider Switches User Guide 71
4
The Mapping Parameters area contains the following fields:
• CPE VLAN — Indicates the CPE VLAN which is mapped to the Multicast TV
VLAN.
• Multicast TV VLAN — Indicates the Multicast TV VLAN which is mapped to
the CPE VLAN.
STEP 2 Define the mapping.
STEP 3 Click Add to List. The mapped VLANs are displayed in the CPE VLAN Mapping
table.
The CPE VLAN Mapping Table displays the mapped VLANs.
STEP 4 Click Save Settings. The device is updated.