Cisco Telepresence MX800 - Page 35

D15119.02 MX700 and MX800 Administrator Guide TC7.2, AUGUST 2014. www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.
35
Cisco TelePresence MX700 and MX800 Administrator Guide
User administration
Creating a new user account
Follow these steps in order to create a new user account:
1. Click Add new user....
2. Fill in the Username and Password
*
, and check the
appropriate user roles check boxes.
As a default the user has to change the password when
signing in for the first time.
Do not fill in the Client Certificate DN (Distinguished
Name) field unless you want to use certificate login on
HTTPS.
3. Set the Status to Active to activate the user.
4. Click Create User to save the changes.
Use the Back button to leave without making any
changes.
Navigate to: Configuration > User Administration
* The password is used with the web interface and command line interface.
(page 2 of 4)
Contents
Introduction
Web interface
System settings
Setting passwords
Appendices
Web interface