Cisco Telepresence MX800 - Cisco Spark Getting Started

D15119.02 MX700 and MX800 Administrator Guide TC7.2, AUGUST 2014. www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.
36
Cisco TelePresence MX700 and MX800 Administrator Guide
User administration
Changing user privileges
Follow these steps in order to change the user privileges:
1. Click the name of an existing user to open the Editing
user window.
2. Check the appropriate user roles check boxes, decide if
the user has to change the password on the next sign in,
and fill in the Client Certificate DN field if using certificate
login on HTTPS.
3. Click Update User to save the changes.
Use the Back button to leave without making any
changes.
Changing the password
Follow these steps in order to change the password
*
:
1. Click the name of an existing user to open the Editing
user window.
2. Enter the new password in the appropriate input fields.
3. Click Change Password to save the change.
Use the Back button to leave without making any
changes.
Navigate to: Configuration > User Administration
* The password is used with the web interface and command line interface.
(page 3 of 4)
Contents
Introduction
Web interface
System settings
Setting passwords
Appendices
Web interface