Cisco Telepresence MX800 User Manual

15
D1534504 User Guide
Cisco TelePresence
Produced: November 2016 for CE 8.2
All contents © 2010–2016
Cisco Systems, Inc. All rights reserved.
Receive Call
•
If someone calls you, you may
accept, decline or ignore the call.
•
If you decline the call, busy
information will be sent to the
calling party.
•
If you ignore the call, the calling
party will perceive this as if you
were absent (you did not pick up
the call.
•
You may want to set your system
to respond automatically to an
incoming call (Auto Answer). This
is described in “Administrator
Settings—Call Details” on page
76. Observe that your video
support team may have password
protected this menu.
•
If you choose to activate Auto
Answer you may want to mute the
microphone to preserve privacy.
This must be set up manually every
time.
If your system permits automatic response to incoming
calls (Auto Answer) you may want to mute the system
microphone(s), to preserve privacy.
Microphone(s) are muted if this symbol is illuminated. To
mute / unmute the microphone(s), tap the symbol.
If Someone Calls You
Receive Call

Cisco Telepresence MX800 Specifications

General

Pan range	-90 - 60 °
Product type	Video conferencing service management system
Product color	White
Wall mountable	Yes
Tilt angle range	-14 - 12 °
Number of persons	- person(s)
Aspect ratio	16:9
Maximum frame rate	60 fps
Supported video modes	720p, 1080p
Video formats supported	H.261, H.263, H.264, H.265
Resolution at capture speed	1920x1080@60fps
Supported graphics resolutions	352 x 288, 512 x 288, 1024 x 576 (WSVGA), 1024 x 768 (XGA), 1280 x 720 (HD 720), 1280 x 768 (WXGA), 1920 x 1080 (HD 1080), 1920 x 1200 (WUXGA)
Megapixel	- MP
Sensor type	-
Digital zoom	2 x
Optical zoom	10 x
Image sensor size	- \
Closest focusing distance	1 m
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Display diagonal	70 \
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %
AC input voltage	100-240 V
AC input frequency	50 - 60 Hz
Power consumption (max)	591 W
Power consumption (typical)	571 W