Cisco Telepresence MX800 User Manual

29
D1534504 User Guide
Cisco TelePresence
Produced: November 2016 for CE 8.2
All contents © 2010–2016
Cisco Systems, Inc. All rights reserved.
Conference Calls with Multiple Participants
Manage Conference Call Layout
The new layout will now be put in eect.
To change the existing layout on your video screen, tap
Layout.
Tap the new preferred layout.
You may alter the screen layout
when you are in a call. The Touch
pad will show the options available.
The actual options may dier from
what is shown here, but the Touch
device will always show you what is
available.
The WYSIWYG (what you see is what
you get) principle applies even here.
Including a Selfview
Selfview (what the others see from
your video system) may be added
to any layout in the usual way. To
invoke the selfview See “Manage
Selfview” on page 58.
If needed, you may also move the
selfview to a dierent location.
See “Move the Selfview PiP” on
page 60.
About Layout Options

Cisco Telepresence MX800 Specifications

General

Pan range	-90 - 60 °
Product type	Video conferencing service management system
Product color	White
Wall mountable	Yes
Tilt angle range	-14 - 12 °
Number of persons	- person(s)
Aspect ratio	16:9
Maximum frame rate	60 fps
Supported video modes	720p, 1080p
Video formats supported	H.261, H.263, H.264, H.265
Resolution at capture speed	1920x1080@60fps
Supported graphics resolutions	352 x 288, 512 x 288, 1024 x 576 (WSVGA), 1024 x 768 (XGA), 1280 x 720 (HD 720), 1280 x 768 (WXGA), 1920 x 1080 (HD 1080), 1920 x 1200 (WUXGA)
Megapixel	- MP
Sensor type	-
Digital zoom	2 x
Optical zoom	10 x
Image sensor size	- \
Closest focusing distance	1 m
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Display diagonal	70 \
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %
AC input voltage	100-240 V
AC input frequency	50 - 60 Hz
Power consumption (max)	591 W
Power consumption (typical)	571 W