Cisco Telepresence MX800 User Manual

3
D1534504 User Guide
Cisco TelePresence
Produced: November 2016 for CE 8.2
All contents © 2010–2016
Cisco Systems, Inc. All rights reserved.
Settings
Gain Access to the Settings
................................................61
Ringtone & Sound
............................................................... 62
Camera Control
.................................................................. 63
Main Source Selection
....................................................... 64
Display
................................................................................ 65
Select Language
................................................................ 66
System Information
............................................................. 67
Call Status
.......................................................................... 68
Diagnostic Mode
................................................................. 69
Restart System
................................................................... 70
Administrator
.......................................................................71
Administrator Settings—Tracking
......................................... 72
Administrator Settings—Set Date and Time
........................ 73
Administrator Settings—Call Details
.....................................74
Administrator Settings—Provisioning Wizard
...................... 75
Administrator Settings—Multipoint Mode
............................ 76
Administrator Settings—Pairing
........................................... 77
Administrator Settings—IP & VLAN, Codec
........................ 78
Administrator Settings—Network Status Codec
................. 79
Administrator Settings—IP & VLAN, Touch.......................... 80
Administrator Settings—Network Status Touch
.................. 81
Administrator Settings—SIP
................................................ 82
Administrator Settings—H323
............................................. 83
Administrator Settings—EMC Resilience Mode
................... 84
Administrator Settings—Factory Reset
................................ 85
What’s in this guide (II)
Contents

Cisco Telepresence MX800 Specifications

General

Pan range	-90 - 60 °
Product type	Video conferencing service management system
Product color	White
Wall mountable	Yes
Tilt angle range	-14 - 12 °
Number of persons	- person(s)
Aspect ratio	16:9
Maximum frame rate	60 fps
Supported video modes	720p, 1080p
Video formats supported	H.261, H.263, H.264, H.265
Resolution at capture speed	1920x1080@60fps
Supported graphics resolutions	352 x 288, 512 x 288, 1024 x 576 (WSVGA), 1024 x 768 (XGA), 1280 x 720 (HD 720), 1280 x 768 (WXGA), 1920 x 1080 (HD 1080), 1920 x 1200 (WUXGA)
Megapixel	- MP
Sensor type	-
Digital zoom	2 x
Optical zoom	10 x
Image sensor size	- \
Closest focusing distance	1 m
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Display diagonal	70 \
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %
AC input voltage	100-240 V
AC input frequency	50 - 60 Hz
Power consumption (max)	591 W
Power consumption (typical)	571 W