Cisco UCS X9508 - Australia and New Zealand; Continental Europe; International

that plugs into the chassis’ PEM and an IEC C20 connector on the end that plugs into an IEC C19 outlet
receptacle. For more information, contact your Cisco Systems representative.
Only the regular power cords or jumper power cords provided with the chassis are supported.
Note
Australia and New Zealand
Power Cord Part Number—CAB-AC-16A-AUS
Cord Set Rating—16A, 250 VAC
Figure 54: CAB-AC-16A-AUS Power Cord for the Cisco UCS X9508 Chassis
Continental Europe
Power Cord Part Number—CAB-AC-2800W-EU
Cord Set Rating—16A, 250 VAC
Figure 55: CAB-AC-2800W-EU Power Cord for the UCS X9508 Chassis
International
Power Cord Part Number—CAB-AC-2800W-INT
Cord Set Rating—16A, 250 VAC
Cisco UCS X9508 Server Chassis Installation Guide
112
Technical Specifications
Australia and New Zealand