Cisco UCS X9508 User Manual

Removing a Compute Node Blank
Do not operate the server chassis with an empty compute node slot. Fill any empty compute node slots with
either a blank (UCSX-9508-FSBK) or a compute node.
Use this task to remove a compute node blank.
Step 1 Grasp the compute node by the finger holds.
Figure 32: Compute Node Blanks, Installed
Step 2 Pull the compute node blank towards you until it is completely removed from the chassis.
Notice that the module blank has indicators that show how to orient the blank. You will use this information when you
install a blank.
Cisco UCS X9508 Server Chassis Installation Guide
64
Installing and Removing Components
Removing a Compute Node Blank

Cisco UCS X9508 Specifications

General

Brand	Cisco
Model	UCS X9508
Category	Server
Language	English