Cisco UCS X9508 - Installing Rear Mounting Brackets

Figure 23: Securing the Front of the Chassis to the Rack
Step 5 Choose the appropriate option:
a) If your chassis will ship per-installed in a rack, attach the rear mounting brackets. If you plan to install and ship your
chassis in a shippable rack, attach the rear mounting brackets. See Installing Rear Mounting Brackets, on page 43.
b) If you will be installing the chassis in a stationary rack, continue the installation procedure. See Completing Installation,
on page 45.
Installing Rear Mounting Brackets
Use this procedure to install the rear mounting (tie down) brackets.
Cisco UCS X9508 Server Chassis Installation Guide
43
Installation
Installing Rear Mounting Brackets