Cisco XR 12000 Series - User Manual

Cisco IOS XR Virtual Private Network Command Reference for the
Cisco XR 12000 Series Router, Release 4.3.x
First Published: 2012-12-01
Last Modified: 2013-05-01
Americas Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
http://www.cisco.com
Tel: 408 526-4000
800 553-NETS (6387)
Fax: 408 527-0883
Text Part Number: OL-28460-01

Cisco XR 12000 Series Specifications

General

Brand	Cisco
Model	XR 12000 Series
Category	Network Router
Language	English

Summary

Virtual Private Network Commands

authentication (L2 TP) Command

Enables L2TP authentication for a specified L2TP class name.

l2 vpn Command

Enters L2VPN configuration mode.

neighbor (L2 VPN) Command

Configures a pseudowire for a cross-connect.

pw-class (L2 VPN) Command

Enters pseudowire class submode to define a pseudowire class template.

p2 p Command

Enters p2p configuration submode to configure point-to-point cross-connects.

timeout setup (L2 TP) Command

transport mode (L2 VPN) Command

tunnel-template Command

xconnect group Command

Virtual Private LAN Services Commands

action (VPLS) Command

Configures bridge behavior when learned MAC addresses reach the MAC limit.

bridge-domain (VPLS) Command

Establishes a bridge domain and enters L2VPN bridge group configuration mode.

bridge group (VPLS) Command

Creates a bridge group to contain bridge domains and assign interfaces.

limit (VPLS) Command

mac (VPLS) Command

maximum (VPLS) Command

mtu (VPLS) Command

neighbor (VPLS) Command

shutdown (Bridge Domain) Command

time (VPLS) Command

vfi (VPLS) Command