Cisco XR 12000 Series User Manual

description (GLOBAL)
To specify the description of a multisegment pseudowire globally, use the description command in l2vpn
configuration mode. To revert, use the no form of the command.
description description-name
no description
Syntax Description
Name of the description of the multisegment pseudowire.
description-name
Command Default
None
Command Modes
l2vpn
Command History
ModificationRelease
This command was introduced.Release 4.1.1
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
OperationTask ID
read, writel2vpn
Examples
The example shows how to specify the description of a multisegment pseudowire:
RP/0/0/CPU0:router# configure
RP/0/0/CPU0:router(config)# l2vpn
RP/0/0/CPU0:router(config-l2vpn)# description S-PE1
Related Commands
DescriptionCommand
Specifies the description of an l2vpn cross connect.description (XCONNECT), on page 26
Cisco IOS XR Virtual Private Network Command Reference for the Cisco XR 12000 Series Router, Release 4.3.x
OL-28460-01 25
Virtual Private Network Commands
description (GLOBAL)

Cisco XR 12000 Series Specifications

General

Brand	Cisco
Model	XR 12000 Series
Category	Network Router
Language	English