Cisco XR 12000 Series User Manual

l2vpn
To enter L2VPN configuration mode, use the l2vpn command in global configuration mode. To return to the
default behavior, use the no form of this command.
l2vpn
no l2vpn
Syntax Description
This command has no arguments or keywords.
Command Default
None
Command Modes
Global configuration
Command History
ModificationRelease
This command was introduced.Release 3.4.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
All L2VPN configuration can be deleted using the no l2vpn command.Note
Task ID
OperationsTask ID
read, writel2vpn
Examples
The following example shows how to enter L2VPN configuration mode:
RP/0/0/CPU0:router# configure
RP/0/0/CPU0:router(config)# l2vpn
RP/0/0/CPU0:router(config-l2vpn)#
Cisco IOS XR Virtual Private Network Command Reference for the Cisco XR 12000 Series Router, Release 4.3.x
OL-28460-01 49
Virtual Private Network Commands
l2vpn

Cisco XR 12000 Series Specifications

General

Brand	Cisco
Model	XR 12000 Series
Category	Network Router
Language	English