Cisco XR 12000 Series User Manual

l2transport cell-packing
To configure L2VPN cell packing parameters, use the l2transport cell-packing command in interface
configuration mode. To return to the default behavior, use the no form of this command.
l2transport cell-packing maximum timer
no l2transport cell-packing maximum timer
Syntax Description
Maximum number of cells to be packed in a packet. Range is 2 to 86.
maximum
Cell packing timer (1, 2, or 3).
timer
Command Default
No default behavior or values
Command Modes
Interface configuration
Command History
ModificationRelease
This command was introduced.Release 3.5.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
OperationsTask ID
read, writel2vpn
read, writeatm
Examples
The following example shows how to configure L2VPN cell packing parameters:
RP/0/0/CPU0:router# configure
RP/0/0/CPU0:router(config)# interface GigabitEthernet 0/0/0/0
RP/0/0/CPU0:router(config-if)# l2transport cell-packing 33 2
Cisco IOS XR Virtual Private Network Command Reference for the Cisco XR 12000 Series Router, Release 4.3.x
OL-28460-01 45
Virtual Private Network Commands
l2transport cell-packing

Cisco XR 12000 Series Specifications

General

Brand	Cisco
Model	XR 12000 Series
Category	Network Router
Language	English