Cisco XR 12000 Series User Manual

transport mode (L2VPN)
To configure L2VPN pseudowire class transport mode, use the transport mode command in L2VPN
pseudowire class MPLS encapsulation mode. To disable the L@VPN pseudowire class transport mode
configuration, use the no form of this command.
transport mode {ethernet| vlan }
no transport mode {ethernet| vlan }
Syntax Description
Configures Ethernet port mode.ethernet
Configures VLAN tagged mode.vlan
Command Default
None
Command Modes
L2VPN pseudowire class MPLS encapsulation
Command History
ModificationRelease
This command was introduced.Release 3.7.2
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
All L2VPN configurations can be deleted using the no l2vpn command.Note
Task ID
OperationsTask ID
read, writel2vpn
Examples
This example shows how to configure Ethernet transport mode:
RP/0/0/CPU0:router# configure
RP/0/0/CPU0:router(config)# l2vpn
RP/0/0/CPU0:router(config-l2vpn)# pw-class kanata01
Cisco IOS XR Virtual Private Network Command Reference for the Cisco XR 12000 Series Router, Release 4.3.x
148 OL-28460-01
Virtual Private Network Commands
transport mode (L2VPN)

Cisco XR 12000 Series Specifications

General

Brand	Cisco
Model	XR 12000 Series
Category	Network Router
Language	English