Cisco XR 12000 Series User Manual

receive-window (L2TP)
To configure the receive window size for the L2TP server, use the receive-window command in L2TP class
configuration mode. To return to the default behavior, use the no form of this command.
receive-window size
no receive-window size
Syntax Description
Maximum number of packets that are received from a peer before back-off is applied.
Default is 512.
size
Command Default
size: 512
Command Modes
L2TP class configuration
Command History
ModificationRelease
This command was introduced.Release 3.7.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
OperationsTask ID
read, writel2vpn
Examples
The following example shows how to configure the receive window size for the L2TP server to 10 packets:
RP/0/0/CPU0:router# configure
RP/0/0/CPU0:router(config)# l2tp-class cisco
RP/0/0/CPU0:router(config-l2tp-class)# receive-window 10
Related Commands
DescriptionCommand
Enables L2TP authentication for a specified L2TP class name.authentication (L2TP), on page 4
Cisco IOS XR Virtual Private Network Command Reference for the Cisco XR 12000 Series Router, Release 4.3.x
76 OL-28460-01
Virtual Private Network Commands
receive-window (L2TP)

Cisco XR 12000 Series Specifications

General

Brand	Cisco
Model	XR 12000 Series
Category	Network Router
Language	English