Cisco XR 12000 Series User Manual

tunnel-template
To enter tunnel-template configuration submode, use the tunnel-template command in global configuration
mode.
tunnel-template template name
no tunnel-template template-name
Syntax Description
Configures a name for the tunnel template.
template-name
Command Default
None
Command Modes
Global configuration
Command History
ModificationRelease
This command was introduced.Release 3.5.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
OperationsTask ID
read, writetunnel
Examples
The following example shows how to enter tunnel-template configuration submode:
RP/0/0/CPU0:router# configure
RP/0/0/CPU0:router(config)# tunnel-template template_01
Related Commands
DescriptionCommand
Configures cross-connect groups.xconnect group, on page 151
Cisco IOS XR Virtual Private Network Command Reference for the Cisco XR 12000 Series Router, Release 4.3.x
150 OL-28460-01
Virtual Private Network Commands
tunnel-template

Cisco XR 12000 Series Specifications

General

Brand	Cisco
Model	XR 12000 Series
Category	Network Router
Language	English