Cisco XR 12000 Series - Virtual Private LAN Services Commands

Virtual Private LAN Services Commands
This module describes the commands used to configure, monitor, and troubleshoot Virtual Private LAN
Services (VPLS).
For detailed information about virtual private network concepts, configuration tasks, and examples, refer to
the Virtual Private Configuration Guide.
•
action (VPLS), page 155
•
aging (VPLS), page 157
•
bridge-domain (VPLS), page 159
•
bridge group (VPLS), page 161
•
clear l2vpn bridge-domain (VPLS), page 163
•
flooding disable, page 165
•
flooding unknown-unicast disable (VPLS), page 167
•
interface (VPLS), page 169
•
learning disable (VPLS), page 171
•
limit (VPLS), page 173
•
mac (VPLS), page 175
•
maximum (VPLS), page 177
•
mpls static label (VPLS), page 179
•
mtu (VPLS), page 181
•
neighbor (VPLS), page 183
•
notification (VPLS), page 185
•
port-down flush disable (VPLS), page 187
•
pw-class (VFI), page 189
•
pw-status (L2VPN), page 191
•
show l2vpn bridge-domain (VPLS), page 193
•
show l2vpn forwarding bridge-domain (VPLS), page 201
Cisco IOS XR Virtual Private Network Command Reference for the Cisco XR 12000 Series Router, Release 4.3.x
OL-28460-01 153