Cisco XR 12000 Series User Manual

description (XCONNECT)
To specify the description of an l2vpn xconnect such as attachment circuit (AC) AC-AC, AC-PW, and
multisegment pseudowire (MS-PW), use the description command in L2VPN xconnect mode. To revert, use
the no form of the command.
description description-name
no description
Syntax Description
Name of the description of the cross connect.
description-name
Command Default
None
Command Modes
L2VPN xconnect
Command History
ModificationRelease
This command was introduced.Release 4.1.1
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
OperationTask ID
read, writel2vpn
Examples
The example shows how to specify the description of a cross connect:
RP/0/0/CPU0:router# configure
RP/0/0/CPU0:router(config)# l2vpn
RP/0/0/CPU0:router(config-l2vpn)# xconnect group MS-PW1
RP/0/0/CPU0:router(config-l2vpn-xc)# p2p ms-pw1
RP/0/0/CPU0:router(config-l2vpn-xc-p2p)# description MS-PW from T-PE1 to T-PE2
Related Commands
DescriptionCommand
Specifies multisegment pseudowire global description.description (GLOBAL), on page 25
Cisco IOS XR Virtual Private Network Command Reference for the Cisco XR 12000 Series Router, Release 4.3.x
26 OL-28460-01
Virtual Private Network Commands
description (XCONNECT)

Cisco XR 12000 Series Specifications

General

Brand	Cisco
Model	XR 12000 Series
Category	Network Router
Language	English