Cisco XR 12000 Series User Manual

password (L2TP)
To define the password and password encryption type for control channel authentication, use the password
command in L2TP class configuration mode. To return to the default behavior, use the no form of this
command.
password [0| 7] password
no password
Syntax Description
(Optional) Specifies that an unencrypted password will follow.0
(Optional) Specifies that an encrypted password will follow.7
Unencrypted or clear text user password.
password
Command Default
None
Command Modes
Global configuration
Command History
ModificationRelease
This command was introduced.Release 3.7.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
OperationsTask ID
read, writel2vpn
Examples
The following example shows how to define an unencrypted password using the word “cisco” for control
channel authentication:
RP/0/0/CPU0:router# configure
RP/0/0/CPU0:router(config)# l2tp-class sanjose
RP/0/0/CPU0:router(config-l2tp-class)# password 0 cisco
Cisco IOS XR Virtual Private Network Command Reference for the Cisco XR 12000 Series Router, Release 4.3.x
OL-28460-01 63
Virtual Private Network Commands
password (L2TP)

Cisco XR 12000 Series Specifications

General

Brand	Cisco
Model	XR 12000 Series
Category	Network Router
Language	English