EasyManua.ls Logo

Cisco XR 12000 Series - Page 117

Cisco XR 12000 Series
234 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Number of MAC: 0
.
RP/0/0/CPU0:router#show l2vpn forwarding bridge-domain detail location 0/2/CPU0
Bridge-domain name: bg1:bd1, id: 0, state: up
.
GigabitEthernet0/2/0/0.4, state: oper up
XC ID: 0x1880002
Number of MAC: 0
Statistics:
packets: received 0 (multicast 0, broadcast 0, unknown unicast 0, unicast 0), sent 963770
bytes: received 0 (multicast 0, broadcast 0, unknown unicast 0, unicast 0), sent 263433178
MAC move: 0
Storm control drop counters:
packets: broadcast 0, multicast 0, unknown unicast 0
bytes: broadcast 0, multicast 0, unknown unicast 0
Dynamic arp inspection drop counters:
packets: 0, bytes: 0
IP source guard drop counters:
packets: 0, bytes: 0
.
The following sample outputs displays the SPAN segment information of the xconnect:
RP/0/0/CPU0:router# show l2vpn forwarding counter location 0/7/CPU0
Legend: ST = State, DN = Down
Segment 1 Segment 2 ST Byte
Switched
----------------------------- ----------------------- -- ---------
pw-span-test (Monitor-Session) mpls 2.2.2.2 UP 0
RP/0/0/CPU0:router #Show l2vpn forwarding monitor-session location 0/7/CPU0
Segment 1 Segment 2 State
------------------------------------ ------------------------------------ ------
pw-span-test(monitor-session) mpls 2.2.2.2 UP
pw-span-sess(monitor-session) mpls 3.3.3.3 UP
RP/0/0/CPU0:router #Show l2vpn forwarding monitor-session pw-span-test location 0/7/CPU0
Segment 1 Segment 2 State
------------------------------------ ------------------------------------ ------
pw-span-test(Monitor-Session) mpls 2.2.2.2 UP
Example 4:
RP/0/0/CPU0:router #show l2vpn forwarding detail location 0/7/CPU0
Xconnect id: 0xc000001, Status: up
Segment 1
Monitor-Session, pw-span-test, status: Bound
Segment 2
MPLS, Destination address: 2.2.2.2, pw-id: 1, status: Bound
Pseudowire label: 16001
Statistics:
packets: received 0, sent 11799730
bytes: received 0, sent 707983800
Example 5:
show l2vpn forwarding private location 0/11/CPU0
Xconnect ID 0xc000001
Xconnect info:
Base info: version=0xaabbcc13, flags=0x0, type=2, reserved=0
xcon_bound=TRUE, switching_type=0, data_type=3
AC info:
Base info: version=0xaabbcc11, flags=0x0, type=3, reserved=0
xcon_id=0xc000001, ifh= none, subifh= none, ac_id=0, ac_type=SPAN,
ac_mtu=1500, iw_mode=none, adj_valid=FALSE, adj_addr none
Cisco IOS XR Virtual Private Network Command Reference for the Cisco XR 12000 Series Router, Release 4.3.x
OL-28460-01 109
Virtual Private Network Commands
show l2vpn forwarding

Table of Contents

Other manuals for Cisco XR 12000 Series

Related product manuals