Cisco XR 12000 Series

Examples
The following example shows how to configure a timeout value for L2TP session setup of 400 seconds:
RP/0/0/CPU0:router# configure
RP/0/0/CPU0:router(config)# l2vpn
RP/0/0/CPU0:router(config-l2vpn)# pw-class cisco
RP/0/0/CPU0:router(config-l2vpn-pwc)# encapsulation mpls
RP/0/0/CPU0:router(config-l2vpn-pwc-mpls)# switching-tlv hide
RP/0/0/CPU0:router(config-l2vpn-pwc-mpls)#
Related Commands
DescriptionCommand
Enters pseudowire class submode to define a pseudowire class
template.
pw-class (L2VPN), on page 65
Cisco IOS XR Virtual Private Network Command Reference for the Cisco XR 12000 Series Router, Release 4.3.x
OL-28460-01 141
Virtual Private Network Commands
switching-tlv (L2VPN)