Related Commands
DescriptionCommand
Establishes a bridge domain, and enters L2VPN bridge group bridge
domain configuration mode.
bridge-domain (VPLS), on page 159
Creates a bridge group so that it can contain bridge domains and then
to assign network interfaces to the bridge domain.
bridge group (VPLS), on page 161
Enters L2VPN configuration mode.l2vpn, on page 49
Adjusts the maximum packet size or maximum transmission unit
(MTU) size for the bridge domain.
mtu (VPLS), on page 181
Cisco IOS XR Virtual Private Network Command Reference for the Cisco XR 12000 Series Router, Release 4.3.x
166 OL-28460-01
Virtual Private LAN Services Commands
flooding disable