Cisco XR 12000 Series User Manual

RP/0/0/CPU0:router(config-l2vpn-bg-bd-mac)# limit
RP/0/0/CPU0:router(config-l2vpn-bg-bd-mac-limit)# maximum 5000
RP/0/0/CPU0:router(config-l2vpn-bg-bd-mac-limit)# action no-flood
Related Commands
DescriptionCommand
Configures bridge behavior when the number of learned MAC
addresses reaches the MAC limit configured.
action (VPLS), on page 155
Establishes a bridge domain, and enters L2VPN bridge group bridge
domain configuration mode.
bridge-domain (VPLS), on page 159
Creates a bridge group so that it can contain bridge domains and then
to assign network interfaces to the bridge domain.
bridge group (VPLS), on page 161
Enters L2VPN configuration mode.l2vpn, on page 49
Sets the MAC address limit for action, maximum, and notification
and enters L2VPN bridge group bridge domain MAC limit
configuration mode.
limit (VPLS), on page 173
Enters L2VPN bridge group bridge domain MAC configuration mode.mac (VPLS), on page 175
Specifies the type of notification that is sent when the number of
learned MAC addresses exceeds the configured limit.
notification (VPLS), on page 185
Cisco IOS XR Virtual Private Network Command Reference for the Cisco XR 12000 Series Router, Release 4.3.x
178 OL-28460-01
Virtual Private LAN Services Commands
maximum (VPLS)

Cisco XR 12000 Series Specifications

General

Brand	Cisco
Model	XR 12000 Series
Category	Network Router
Language	English