RP/0/0/CPU0:router(config-l2vpn-bg)# bridge-domain bar
RP/0/0/CPU0:router(config-l2vpn-bg-bd)# mtu 1000
Related Commands
DescriptionCommand
Establishes a bridge domain, and enters L2VPN bridge group bridge
domain configuration mode.
bridge-domain (VPLS), on page 159
Creates a bridge group so that it can contain bridge domains and
then to assign network interfaces to the bridge domain.
bridge group (VPLS), on page 161
Configures flooding for traffic at the bridge domain level or at the
bridge port level.
flooding disable, on page 165
Enters L2VPN configuration mode.l2vpn, on page 49
Cisco IOS XR Virtual Private Network Command Reference for the Cisco XR 12000 Series Router, Release 4.3.x
182 OL-28460-01
Virtual Private LAN Services Commands
mtu (VPLS)