Cisco XR 12000 Series

Examples
The following example shows how to enable pseudowire status signaling on configured pseudowires:
RP/0/0/CPU0:router# configure
RP/0/0/CPU0:router(config)# l2vpn
RP/0/0/CPU0:router(config-l2vpn)# pw-status
RP/0/0/CPU0:router(config-l2vpn)#
Related Commands
DescriptionCommand
Enters L2VPN configuration mode.l2vpn, on page 49
Cisco IOS XR Virtual Private Network Command Reference for the Cisco XR 12000 Series Router, Release 4.3.x
192 OL-28460-01
Virtual Private LAN Services Commands
pw-status (L2VPN)