Cisco XR 12000 Series - Page 204

Filter MAC addresses: 0
ACs: 1 (1 up), VFIs: 1, PWs: 1 (1 up)
List of ACs:
Gi0/1/0/0, state: up, Static MAC addresses: 2, MSTi: 0 (unprotected)
List of Access PWs:
List of VFIs:
VFI 1
Neighbor 10.1.1.1 pw-id 1, state: up, Static MAC addresses: 0
This table describes the significant fields shown in the display.
Table 10: show l2vpn bridge-domain Command Field Descriptions
DescriptionField
Name of bridge domain group is displayed.Bridge group
Name of bridge domain is displayed.bridge-domain
ID assigned to this bridge domain is displayed.id
Current state of the bridge domain is displayed.state
The following example shows sample output for a bridge named bd1:
RP/0/0/CPU0:router# show l2vpn bridge-domain bd-name bd1
Bridge group: g1, bridge-domain: bd1, id: 0, state: up, ShgId: 0, MSTi: 0
Aging: 300 s, MAC limit: 4000, Action: none, Notification: syslog
Filter MAC addresses: 0
ACs: 1 (1 up), VFIs: 1, PWs: 1 (1 up)
List of ACs:
Gi0/1/0/0, state: up, Static MAC addresses: 2, MSTi: 0 (unprotected)
List of Access PWs:
List of VFIs:
VFI 1
Neighbor 10.1.1.1 pw-id 1, state: up, Static MAC addresses: 0
The following sample output shows brief information about the bridges:
RP/0/0/CPU0:router# show l2vpn bridge-domain brief
Bridge Group/Bridge-Domain Name ID State Num ACs/up Num PWs/up
-------------------------------- ----- ---------- -------------- --------------
g1/bd1 0 up 1/1 1/1
This table describes the significant fields shown in the display.
Table 11: show l2vpn bridge-domain brief Command Field Descriptions
DescriptionField
Bridge domain group name followed by the bridge
domain name are displayed.
Bridge Group/Bridge-Domain Name
ID assigned to this bridge domain is displayed.ID
Current state of the bridge domain is displayed.State
Cisco IOS XR Virtual Private Network Command Reference for the Cisco XR 12000 Series Router, Release 4.3.x
196 OL-28460-01
Virtual Private LAN Services Commands
show l2vpn bridge-domain (VPLS)