Cisco XR 12000 Series

Task ID
OperationsTask ID
read, writel2vpn
Examples
The following example shows how to configure an attachment circuit on a TenGigE interface:
RP/0/0/CPU0:router# configure
RP/0/0/CPU0:router(config)# l2vpn
RP/0/0/CPU0:router(config-l2vpn)# xconnect group gr1
RP/0/0/CPU0:router(config-l2vpn-xc)# p2p p001
RP/0/0/CPU0:router(config-l2vpn-xc-p2p)# interface TenGigE 1/1/1/1
Related Commands
DescriptionCommand
Enters p2p configuration submode to configure point-to-point
cross-connects.
p2p, on page 74
Cisco IOS XR Virtual Private Network Command Reference for the Cisco XR 12000 Series Router, Release 4.3.x
36 OL-28460-01
Virtual Private Network Commands
interface (p2p)