Cisco XR 12000 Series User Manual

Command History
ModificationRelease
This command was introduced.Release 3.5.0
The keywords control word disable and vccv none were replaced by
the keywords control word and vccv verification-type none .
Release 3.8.0
The following keywords were added:
•
preferred-path
•
sequencing
•
tag-rewrite
•
transport-mode
Release 3.9.0
The keyword redundancy one-way was introduced.Release 4.2.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
All L2VPN configurations can be deleted using the no l2vpn command.Note
Task ID
OperationsTask ID
read, writel2vpn
Examples
This example shows how to define MPLS pseudowire encapsulation:
RP/0/0/CPU0:router# configure
RP/0/0/CPU0:router(config)# l2vpn
RP/0/0/CPU0:router(config-l2vpn)# pw-class kanata01
RP/0/0/CPU0:router(config-l2vpn-pwc)# encapsulation mpls
Related Commands
DescriptionCommand
Enters pseudowire class submode to define a pseudowire
class template.
pw-class (L2VPN), on page 65
Configures L2TPv3 pseudowire encapsulation.pw-class encapsulation l2tpv3, on page 67
Cisco IOS XR Virtual Private Network Command Reference for the Cisco XR 12000 Series Router, Release 4.3.x
70 OL-28460-01
Virtual Private Network Commands
pw-class encapsulation mpls

Cisco XR 12000 Series Specifications

General

Brand	Cisco
Model	XR 12000 Series
Category	Network Router
Language	English