- 9 -
2. DETAIL
2.1 ESC/POS Command List
2.1.1 CT-S280
Print Control Commands
・
・
FF
Printing in PAGE MODE and returning to STANDARD MODE
(at the selection of PAGE MODE)
P 64
Printing data in PAGE MODE
Printing and feeding paper in minimum pitch
・
Printing and feeding the paper by “n” lines
・
Print Character Commands
Canceling print data in PAGE MODE
Setting the right spacing of the character
・
Collectively specifying the printing mode
・
Specifying/Canceling download character set
・
Defining the download characters
・
Specifying/canceling underline
・
Deleting download characters
・
Specifying/canceling emphasis printing
・
Specifying/canceling double strike printing
・
Selection of character fonts
・
Selecting the international character set
・
Specifying/canceling 90°-right-turned characters
Selecting the character code table
・
Specifying/canceling the inverted characters
Specifies/cancels printing in red (black-based paper)
・
Specifies/cancels printing in red (black-based paper)
Specifying the character size
・
Specifying/canceling the black/white inverted printing
・
Specifying/canceling the smoothing
・