Citizen CT-D150

Support
model
CT-S280
CT-S300
CT-S2000
CT-S4000
CT-S251
CT-D150/E351
CT-S281
CT-S310
CT-S801/851
CT-S601/651
CT-P29x series
CT-S310II
CT-D151/E651
- 193 -
FS ( A pL pH fn […]
[Function] Setting font attribute of Kanji
[Outline] Setting Kanji font attribute means execution of processing for Kanji font attribute by the value of “fn” specified.
fn
Function
48
Sets Kanji font
[Outline] [The specification which is common to the model]
This command is effective only for the Japanese Kanji specifications.
fn=48: Function 48 Set Kanji fonts
FS ( A pL pH fn m
[Code] <1C>H<28>H<41>H <pL>< pH>< fn>< m>
[Range] (pL+pH×256)=2 (pL=2, pH=0)
fn=48
0≤m≤2, 48≤m≤50
[Default] m=0
[Outline] [The specification which is common to the model]
Prints the succeeding characters with energy set for “m”.
This command is effective only for the Japanese Kanji specifications.
[The specification which depend on the model]
CT-S280/CT-S281/CT-S300/CT-S310/CT-P29x series/
CT-S801(II)/CT-S851(II)/CT-S601(II)/CT-S651(II)/CT-S310II/CT-S251/CT-D150/CT-E351/CT-D
151/CT-E651
m
Function
0, 48
Kanji font A(24×24)
1, 49
invalid
2, 50
Kanji font C(16×16)
CT-S2000/CT-S4000
m
Function
0, 48
Kanji font A(24×24)
1, 49
Kanji font B(20×24)
2, 50
Kanji font C(16×16)