Citizen CT-D150

Support
model
CT-S280
CT-S300
CT-S2000
CT-S4000
CT-S251
CT-D150/E351
CT-S281
CT-S310
CT-S801/851
CT-S601/651
CT-P29x series
CT-S310II
CT-D151/E651
- 168 -
fn=64: Function 64 Sending Key Code List of Defined NV Graphics
GS ( L pL pH m fn d1 d2
[Code] <1D>H<28>H<4C>H<pL><pH><m><fn><d1><d2>
[Range] (pL+pH×256)=4 (pL=4, pH=0)
m=48
fn=64
d1=75(“K”)
d2=67(“C”)
[Outline] [The specification which is common to the model]
• Sends the key code list of defined NV graphics.
When key code list is present
Hex.
Decimal
Data Size
Header
37H
55
1 byte
Identifier
72H
114
1 byte
Status
40H or 41H
64or65
1 byte
Data
30H to 39H
48 to 57
2 to 80 bytes
NUL
00H
0
1 byte
When key code is not present
Hex.
Decimal
Data Size
Header
37H
55
1 byte
Identifier
72H
114
1 byte
Data
40H
64
1 byte
NUL
00H
0
1 byte
• When 40 or more key codes are present, they are sent by being divided in unit of 40max.
Status with continuous transmission data group is 41H.
Status without continuous transmission data group is 40H.
• After sending [Header - NUL] , receives a response from the host and executes the next processing
corresponding to the response.
• In case of “Status (with continuous block): hexadecimal number = 41H / decimal number = 65”
Response
Content of Processing
ASCII
Decimal
ACK
6
Sends next data group.
NAK
21
Resends previous data group.
CAN
24
Cancels processing.
• In case of “Status (last block): hexadecimal number = 40H / decimal number = 64”
Response
Content of Processing
ASCII
Decimal
ACK
6
Terminates processing.
NAK
21
Resends previous data group.
CAN
24
Cancels processing.