Citizen CT-D150

- 484 -
4.2.8 MSW8
●MSW8-1: Print width
[Outline] Selects the print width in dots.
Setting Value
Print Width
832dots, 720dots, 660dots, 640dots, 576dots,
512dots, 436dots, 432dots, 420dots, 384dots, 360dots,
390dots, 546dots
●MSW8-2: Paper type
[Outline] Selects the paper type used.
Setting Value
Paper Type
1 Color Normal, 2 color Normal
●MSW8-3： Top Margin
[Outline] Selects the top margin setting
Setting Value
Top Margin
11mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm
Select the length of top margin
Remarks: When cutting is performed at the end of printing, last printed line is fed to cutter position.
Thus top margin area where printer cannot print is generated at the top of next printing. This
function is to save the paper by feeding paper backward at the starting printing.
●MSW8-4： Line Gap Reduce
[Outline] Selects the line gap reduction ratio
Setting Value
Line Gap Reduce
Invalid, 3/4, 2/3, 1/2, 1/3, 1/4, 1/5, ALL
This is the function to save the paper by reducing gap between lines which do not affect the print
resultt too much.
Invalid: No reduction
3/4 to 1/5: Reduction ratio from original line gap setting
ALL: No gap between lines