Citizen CT-D150

Support
model
CT-S280
CT-S300
CT-S2000
CT-S4000
CT-S251
CT-D150/E351
CT-S281
CT-S310
CT-S801/851
CT-S601/651
CT-P29x series
CT-S310II
CT-D151/E651
- 109 -
2.2.6 Bit Image Commands
ESC * m n1 n2 [d] k
[Function] Specifying the bit image mode
[Code] <1B>H<2A>H<m>H<n1><n2> [<d>] k
[Range] m=0, 1, 32, 33
0≤n1≤255, 0≤n2≤3
0≤d≤255
k=n1+256×n2 (m=0, 1), k=(n1+256×n2)×3 (m=32, 33)
[Outline] [The specification which is common to the model]
• According to the number of dots specified in “n1”, “n2”, specify the bit image of mode “m”.
• The number of dots printed is divided by 256, whose quotient is taken as n2 and residual as “n1”. The total
number of dots printed in the horizontal direction is equal to n1+(256×n2).
• When bit image data have been input in excess of dot positions that can be printed on one line, the excess
data are discarded.
• ”d” is bit image data. Bits to be printed are specified as “1” and those not as “0”.
• The bit image modes specified by “m” are shown as follows:
m Mode
Vertical Direction
Horizontal Direction
Dot Count Dot Density Dot Density
Maximum Dot
Count
0
8 dot single density
8
67dpi
101dpi
(1)
1
8 dot double density
8
67dpi
203dpi
(2)
32
24 dot single density
24
203dpi
101dpi
(3)
33
24 dot double density
24
203dpi
203dpi
(4)