Citizen CT-D150

Support
model
CT-S280
CT-S300
CT-S2000
CT-S4000
CT-S251
CT-D150/E351
CT-S281
CT-S310
CT-S801/851
CT-S601/651
CT-P29x series
CT-S310II
CT-D151/E651
- 370 -
fn=65: Function 65 Setting the number of digits of PDF417
GS ( k pL pH cn fn n
[Code] <1D>H<28>H<6B>H<pL><pH><cn><fn><n>
[Range] (pL+pH×256)=3 (pL=3, pH=0)
cn=48
fn=65
0≤n≤30
[Outline] [The specification which is common to the model]
• Sets the number of digits of PDF417.
• With n=0, automatic processing is specified.
* For the number of digits in this case, the number of code words is calculated based on
current print area.
• With n≠0, the number of digits of PDF417 data area is designated to n code word.
[Caution] [The specification which is common to the model]
• Start pattern and stop pattern are not included in the number of digits.
• Left-step indicator code word and right-step indicator code word are not included in the
number of digits.
[Default] n=0
fn=66: Function 66 Setting the number of steps of PDF417
GS ( k pL pH cn fn n
[Code] <1D>H<28>H<6B>H<pL><pH><cn><fn><n>
[Range] (pL+pH×256)=3 (pL=3, pH=0)
cn=48
fn=66
n=0, 3≤n≤90
[Outline] [The specification which is common to the model]
• Sets the number of steps of PDF417.
• With n=0, automatic processing is specified.
* The number of steps in this case is calculated based on the number of code words and
current print area.
• With n≠0, the number of steps of PDF417 is set to n steps.
[Default] n=0