Citizen CT-D150

Support
model
CT-S280
CT-S300
CT-S2000
CT-S4000
CT-S251
CT-D150/E351
CT-S281
CT-S310
CT-S801/851
CT-S601/651
CT-P29x series
CT-S310II
CT-D151/E651
- 83 -
ESC t n
[Function] Selecting the character code table
[Code] <1B>H<74>H<n>
[Range] 0≤n≤9, 16≤n≤19, n=26, 40, 255
[The specification which depend on the model]
CT-S280/CT-S300/CT-S281/CT-S310/CT-S2000/CT-S4000/
CT-S801/CT-S851/CT-S601/CT-S651/CT-P29x series/CT-S310 II
0≤n≤9, 16≤n≤19, n=26, 40, 255
Newer firmware version of CT-S801II/CT-S851II/CT-S601II/CT-S651II/CT-S251/
CT-S310 II/CT-D150/CT-E351/CT-D151/CT-E651
0≤n≤9, 16≤n≤19, n=26, 30, 31, 40, 255
[Outline] [The specification which is common to the model]
• Selecting the character code table.
• The character code table is selected based on the value of “n”.
n
Character Code Table
n
Character Code Table
0
Codepage PC437
19
Codepage PC858
1
Katakana
20
Thai code11 1 Pass
2
Codepage PC850
21
Thai code11 3 Pass
3
Codepage PC860
25
Thai code 18 1 Pass
4
Codepage PC863
26
Thai code 18 3 Pass
5
Codepage PC865
30
TCVN3
6,18
Codepage PC852
31
TCVN3 Caps
7,17
Codepage PC866
40
Codepage PC864
8
Codepage PC857
255
Space page (For user setting)
9,16
WPC1252
-
-
[Default] [The specification which depend on the model]
CT-S281/CT-S310/CT-S2000/CT-S4000/CT-P29xseries/CT-S801II/CT-S851II/CT-S601II/CT-S
651II/CT-S310 II/CT-S251/CT-D150/CT-E351/CT-D151/CT-E651
n follows the setting of MSW9-1.
[Sample Program]
[Print Results]
LPRINT CHR$(&H1B);"t"; CHR$(0);
LPRINT "n=0 "; n=0
FOR C=&HB1 TO &HB5
LPRINT CHR$(C); n=1 ｱｲｳｴｵ
NEXT C
LPRINT CHR$(&HA);
LPRINT CHR$(&H1B);"t"; CHR$(1);
LPRINT "n=1 ";
FOR C=&HB1 TO &HB5
LPRINT CHR$(C);
NEXT C
LPRINT CHR$(&HA);