Citizen CT-D150 - ESC C 4 N

Support
model
CT-S280
CT-S300
CT-S2000
CT-S4000
CT-S251
CT-D150/E351
CT-S281
CT-S310
CT-S801/851
CT-S601/651
CT-P29x series
CT-S310II
CT-D151/E651
- 147 -
ESC c 4 n
[Function] Selecting the Paper Near-end Sensor valid for print stop
[Code] <1B>H<63>H<34>H<n>
[Range] 0≤n≤255
[Outline] [The specification which is common to the model]
• This command selects the Paper Near-end Sensor which helps to stop printing when the paper supply
almost runs out.
• Each bit for “n” has the following meaning:
Bit Position
Value
0
1
0
Paper Near-end
Disabled
Enabled
1
Paper Near-end
Disabled
Enabled
2
Undefined
-
-
3
Undefined
-
-
4
Undefined
-
-
5
Undefined
-
-
6
Undefined
-
-
7
Undefined
-
-
[The specification which depend on the model]
CT-P29x series/CT-S301II/CT-D150/CT-E351
• This command is invalid due to no paper near end sensor.
[Caution] [The specification which is common to the model]
• This printer can only select one kind of Paper Sensor, a Paper Near-end Sensor.
[Default] n=0