Support
model
- 90 -
GS ! n
[Function] Specifying the character size
[Code] <1D>H<21>H<n>
[Range] 0≤n≤255
Where: 1≤vertical magnification≤8, 1≤horizontal magnification≤8
[Outline] [The specification which is common to the model]
• Specifies the character size (Vertical and horizontal magnification).
Bit Function
Vertical magnification specification Refer to Table 2, “Vertical Magnification”.
Horizontal magnification
specification
Refer to Table 1, “Horizontal Magnification”.
Table 1 Horizontal Magnification Table 2 Vertical Magnification
To Next Page
Loading...
