Citizen CT-D150

Support
model
CT-S280
CT-S300
CT-S2000
CT-S4000
CT-S251
CT-D150/E351
CT-S281
CT-S310
CT-S801/851
CT-S601/651
CT-P29x series
CT-S310II
CT-D151/E651
- 80 -
ESC M n
[Function] Selection of character fonts
[Code] <1B>H<4D>H<n>
[Range] 0≤n≤2, 48≤n≤50
[Outline] [The specification which is common to the model]
• Selects character fonts.
[The specification which depend on the model]
CT-S300/CT-S310/CT-S801/CT-S851/CT-S601/CT-S651/CT-P29x series
n
Function
0, 48
Selection of font A (12 × 24)
1, 49
Selection of font B (9 × 17)
2, 50
Selection of font C (8 × 16)
CT-S280/CT-S281/CT-S2000/CT-S4000/CT-S310 II/
CT-S801II/CT-S851II/CT-S601II/CT-S651II/CT-S251/CT-D150/CT-E351/CT-D151/CT-E651
n
Function
0, 48
Selection of font A (12 × 24)
1, 49
Selection of font B (9 × 24)
2, 50
Selection of font C (8 × 16)
[Caution] • ESC ! can also select fonts, but the setting made by the command that has last been processed
becomes valid.
[Default] n=0
[See Also] ESC!