Citizen CT-D150 - Page 106

Support
model
CT-S280
CT-S300
CT-S2000
CT-S4000
CT-S251
CT-D150/E351
CT-S281
CT-S310
CT-S801/851
CT-S601/651
CT-P29x series
CT-S310II
CT-D151/E651
- 105 -
(2) If a sufficient area cannot be provided as a result of step (1), the print area is extended toward the left (so,
the left margin is decreased).
Printable area
A
Left margin (1) Extended
(2) The left margin is trimmed toward the right
Print area width
(3) If a sufficient area cannot be provided as a result of step (2), the right spacing is trimmed.
• When mapping a bit image (or downloaded bit image), if the print area is narrower than the minimum width of
the bit image (two dots for single density, or one dot for double density), only the line for that image is handled
as follows:
(1) The print area is extended toward the left (so, the left margin is decreased) until it is equal to the minimum
width of the image, but not wider than the printable area.
[Default]
paper
width
print
width/(dot)
nL nH support model
112mm
104mm/(832)
64
3
CT-S4000
112mm
90mm/(720)
208
2
CT-S4000
83mm
82.5/(660)
148
2
CT-S4000
83mm 80mm/(640) 128 2
CT-S2000/CT-S801(II) /CT-S851(II) /CT-S601(II)/
CT-S651(II)
80mm 72mm/(576) 64 2
CT-S300/CT-S310/CT-S2000/CT-S4000/CT-S801(II)/CT-S851(II) /
CT-S601(II) /CT-S651(II) /CT-P293/CT-S310II/CT-D150/CT-E351/CT-D151/CT-E651
80mm 68.25mm(546) 34 2
CT-S801(II)/CT-S851(II)/CT-S601(II)/CT-S651(II)/CT-S310II/CT-D150/CT-E351/
CT-D151/CT-E651
80mm 64mm/(512) 0 2
CT-S300/CT-S310/CT-S2000/CT-S4000/CT-S801(II)/
CT-S851(II)/CT-S601(II)/CT-S651(II)/CT-S310II/CT-D150/CT-E351/CT-D151/CT-E651
60mm 54.5mm/(436) 180 1
CT-S2000/ CT-S801(II) /CT-S851(II) /CT-S601(II)/
CT-S651(II)
58mm 54mm/(432) 176 1
CT-S2000/CT-S4000/CT-S801(II) /CT-S851(II)/
CT-S601(II) /CT-S651(II) /CT-S251
58mm 52.5mm/(420) 156 1
CT-S2000/CT-S801(II) /CT-S851(II) /CT-S601(II)/
CT-S651(II) /CT-S310II/CT-S251/CT-D150/CT-E351/CT-D151/CT-E651
58mm
51mm(408)
152
1
CT-P291
58mm 48.75mm(390) 134 1
CT-S801(II) /CT-S851(II) /CT-S601(II) /CT-S651(II)/
CT-S310II/ CT-S251/CT-D150/CT-E351/CT-D151/CT-E651
58mm 48mm/(384) 128 1
CT-S280/CT-S281/CT-S300/CT-S310/CT-S2000/
CT-S801(II)/CT-S851(II)/CT-S601(II)/CT-S651(II)/
CT-P291/293/CT-S310II/ CT-S251/CT-D150/CT-E351/CT-D151/CT-E651
58mm 45mm/(360) 104 1
CT-S300/CT-S310/CT-S2000/CT-S4000/CT-S801(II)/CT-S601(II)
/CT-S310II/CT-S251/CT-D150/CT-E351/CT-D151/CT-E651
[See Also] GS L, GS P