EasyManua.ls Logo

Citizen CT-D150 - Page 160

Citizen CT-D150
512 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Support
model
CT-S280
CT-S300
CT-S2000
CT-S4000
CT-S251
CT-D150/E351
CT-S281
CT-S310
CT-S801/851
CT-S601/651
CT-P29x series
CT-S310II
CT-D151/E651
- 159 -
[Description of Bar Codes]
UPC-A This bar code, consisting of numerals only, has a fixed length of 12 columns; a 11-
column number entered from the host or application software plus a check digit (12th
column) automatically calculated inside the printer. If the 12th-column numeral is sent
from the host, the entire bar code will be printed as it is.
UPC-E This bar code, consisting of numerals only, has a fixed length of 8 columns.
This printer compresses the 11- or 12-digit data (with check digit) entered to 8 digits by
using zero suppression of UPC-E standard and then prints the data.
Indicates an example of data compression based on zero suppression.
*The printer does not print bar code except the following conditions.
Ex.) Original code shall be (0-ABCDE-VWXYZ)…11 digits (with no check digit
specified).
Printable patterns are as follows:
1. When V - Y are all “0”: “0-ABCDE-0000Z”“ABCDEZ”.
*Provided only 5 - 9 are applied to Z.
2. When E and VWXY are all “0”: “0-ABCD0-0000Z”“ABCDZ4”.
*The last character 4 indicates that maker codes A and D are not “0”.
3. When DE and VWX are “0”: “0-ABC00-000YZ”“ABCYZ3”.
*The last character 3 indicates that A and C are not “0” and ABC is a number of
3 digits.
4. When DE and VW are “0” and C is “0”, “1”, or “2”:
(1)When C=“0”: “0-AB000-00XYZ”“ABXYZ0”.
(2)When C=“1”: “0-AB100-00XYZ”“ABXYZ1”.
(3)When C=“2”: “0-AB200-00XYZ”“ABXYZ2”.
5. The check digit of 12th column is automatically calculated in the printer.
JAN-13(EAN) This bar code, consisting of numerals only, has a fixed length of 13 columns; a 12-
column number entered from the host or application software plus a check digit (13th
column) automatically calculated inside the printer. If the 13th-column numeral is sent
from the host, the entire bar code will be printed as it is.
JAN-8(EAN) This bar code, consisting of numerals only, has a fixed length of 8 columns; a 7- column
number entered from the host or application software plus a check digit (8
th
column)
automatically calculated inside the printer. If the 8th-column numeral is sent from the
host, the entire bar code will be printed as it is.
CODE39 This bar code, consisting of upper-case alphabetic characters and numerals, has a
variable length of columns. The start/stop code “*” is automatically added by the printer.
The available characters include space and “$ % + . / 0 1 2 3 4 5 6 7 8 9” and
upper-case alphabetic characters.
ITF This bar code, consisting of only numerals, has a variable length of even-number
columns. If a code of odd-number columns is sent, the bar code will not be printed.
CODABAR(NW-7) This bar code, consisting of alphanumeric, has a variable length of columns. Available
characters include “0 1 2 3 4 5 6 7 8 9 A B C D $ + . / :”. A start/stop code is required;
any one of A, B, C, and D is used.

Table of Contents

Related product manuals