Citizen CT-D150 - Page 166

Support
model
CT-S280
CT-S300
CT-S2000
CT-S4000
CT-S251
CT-D150/E351
CT-S281
CT-S310
CT-S801/851
CT-S601/651
CT-P29x series
CT-S310II
CT-D151/E651
- 165 -
CT-S801II/CT-S851II/CT-S601II/CT-S651II/CT-S251/CT-D151/CT-E651
fn
Code
Function No.
Function
0, 48 GS ( L pL pH m fn Function48
Sends NV graphics memory
capacity.
2, 50 GS ( L pL pH m fn Function50
Prints graphics data stored in print
buffer.
3, 51 GS ( L pL pH m fn Function51
Sends the remaining amount of NV
graphics memory.
4、52
GS ( L pL pH m fn Function52
Sends the remaining amount of
download graphics memory
64 GS ( L pL pH m fn d1 d2 Function64
Sends key code list of defined NV
graphics.
65 GS ( L pL pH m fn d1 d2 d3 Function65
Erases all data of NV graphics in a
lump.
66 GS ( L pL pH m fn kc1 kc2 Function66
Erases the specified NV graphics
data.
67
GS ( L pL pH m fn a kc1 kc2 b xL xH
yL yH [c d1…dk] 1… [c d1…dk] b
Function67
Defines raster graphics data to NV
memory.
69
GS ( L pL pH m fn kc1 kc2 x y
Function69
Prints the specified NV graphics.
80 GS ( L pL pH m fn d1 d2 Function80
Sends key code List of defined
Download Graphics.
81 GS ( L pL pH m fn d1 d2 d3 Function81
Erases all Data of Download
Graphics in a Lump.
82 GS ( L pL pH m fn kc1 kc2 Function82
Erases specified Download Graphics
Data.
85 GS ( L pL pH m fn kc1 kc2 x y Function85
Prints the specified Download
Graphics Data.
112
GS ( L pL pH m fn a bx by c xL xH yL
yH d1…dk
Function 112
Stores raster graphics data to print
buffer.
• pL, pH specifies the number of bytes or “m” and later to (pL+pH×256).
[Caution] [The specification which is common to the model]
• Frequent use of this command may result in damage of NV memory. Use the Write command to
NV memory in consideration of [10 times max./day] .
• Following the processing of this command, printer Busy may occur during writing data in NV memory. While
the printer is Busy, it stops receiving process. Therefore, data transmission (including real-time command)
from host is prohibited.