Citizen CT-D150 - Page 241

Support
model
CT-S280
CT-S300
CT-S2000
CT-S4000
CT-S251
CT-D150/E351
CT-S281
CT-S310
CT-S801/851
CT-S601/651
CT-P29x series
CT-S310II
CT-D151/E651
- 240 -
[Outline] [The specification which is common to the model]
• Sets the customized value set in “a” to (nL+nH×256).
a
Function
1
Specifies user NV memory capacity.
2
Specifies the memory capacity of NV graphics.
3
Selects paper width.
5
Selects printing density.
6
Selects printing speed.
97
Sets the number of divisions for conducting head
116
Selects printing color.
138
Control of bezel LED
151
Select Security / Connect Device
155
Search of BT device
156
Auto reconnection request
190
Selects the Error LED states for Bluetooth status
201
Sets ACK output position (only parallel I/F).
202
Selects input buffer full Busy output/cancel timing (idle capacity).
212
Selects DMA (Direct Memory Access) control of serial communication.
213
Selects the flow control when virtual COM is set.
214
Select the enable/disable of Kanji.
216
Selects JIS / Shift JIS or Kanji Code
217
Selects the international character set
218
Selects the code page
220
Sets BM width.
221
Sets BM page length.
222
Adjusts the BM sensor and distance between header.
223
Adjusts the distance of BM footer.
224
Adjusts the distance of BM header.
225
Adjusts the BM width and the extreme breath of the distance between
label.
226
Sets the wait time for manual cut
227
Sets the maximum length measurement distance.
228
Sets the after an auto cut movement.
229
Sets the manual cut position movement.
230
Selects the language of LCD message
231
Selects the enable/disable of LCD download message
232
Selects the LCD auto Off time
233
Selects the enable/disable of key lock
234
Selects the direction of LCD message
235
Sets the distance between labels.
236
Sets the label length.
237
Sets the label sensor and distance between header.
238
Adjusts the distance of the label footer.
239
Adjusts the distance of the label header.
240
Sets the buzzer Sound
241
Sets the max dot number for one head division
242
Sets the max dot number for Powered USB
243
Select the mechanism type
244
Select the top margin
245
Select the line gap reduction rate
246
Select the vertical/horizontal character size reduction percentage
247
Selects the number of dot for vertical shift
248
Selects the event to activate buzzer