Citizen CT-D150 - Page 382

Support
model
CT-S280
CT-S300
CT-S2000
CT-S4000
CT-S251
CT-D150/E351
CT-S281
CT-S310
CT-S801/851
CT-S601/651
CT-P29x series
CT-S310II
CT-D151/E651
- 381 -
[Outline] [The specification which is common to the model]
CT-S801II/CT-S851II/CT-S601II/CT-S651II/CT-S251/CT-D151/CT-E651
• Gray Scale raser graphics is printed.
• Size specifies the number of bytes after height1.
• After amassing data of the amassing number of lines specified by height, printing is started.
• Prints the Image data of d1…dk as large as xL times horizontally/yL times vertically.
• xpixel specifies the number of picture Horizontal dots, ypixel specifies the number of picture Vertical dots.
• 4 bits is assigned to 1 dot. 1st byte of image data MSB corresponds to the 1st dot of picture upper left.
• Valid only Standard mode.
• The image data of d1…dk becomes so deep that a value is large (it becomes black).
0: white
1: pale gray
:
:
14: deep gray
15: black